 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AGILE OPTICAL AMPLIFIERS 17 dBm Controlled EDFA for Metro and Long Haul Applications OA 3500 Amplifier Series Key Features * Variable gain, 5 to 23 dB * Fast transient suppression * Variable optical attenuator (VOA) * Constant gain, power, and current modes * Alarms * Platform flexibility Applications * C band * Dense wavelength division multiplexing (DWDM) networks * Metro, long haul, or ultra long haul networks * Pre-amplifier, inline, or booster amplification JDSU's Agile Optical Amplifiers respond dynamically to accommodate changes in number of wavelengths or signal powers using advanced transient suppression techniques. As a result, they preserve gain, flatness and output power over a wide range of input conditions to meet the needs of reconfigurable optical networks. The JDSU OA 3500 Series is a controlled optical amplifier that features variable gain and transient suppression. The maximum optical output of 17 dBm and variable gain range of 5 to 23 dB make the module suitable for pre-amplifier, inline, and booster applications. The transient suppression feature of the module minimizes transmission penalties as channels are added and dropped in the network, or as input power varies. The control interface is a Transistor-Transistor Logic (TTL) level RS232 driven by a 5 V power supply. JDSU has extensive experience with the development of fully functioning erbium doped fiber amplifiers (EDFAs), and can design standard, high-performance optical amplifier products that meet your technical performance, cost target, and time-to-market requirements. NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com OA 3500 AMPLIFIER SERIES 2 Specifications Parameter Signal wavelength Total input signal power (full channel load) Total output signal power Signal gain (design point) Flatness Noise figure Gain transient suppression time Gain transient overshoot/undershoot Power supply requirements Dimensions (W x H x D) Operating temperature OAC-17F3500Cx 1530 to 1563 nm -28 to 12 dBm 17 dBm 5 to 23 dB 1.0 dB 6.0 dB See table below See table below 5V 130 x 212 x 14.75 mm -5 to 70 C Gain Transient Transient Event 3 dB add/drop 9 dB add/drop 15 dB add/drop Maximum Excursion (Overshoot/Undershoot) 0.8 dB 1.5 dB 2.0 dB Settling Time (Typical) 150 200 300 Settling Time (Maximum) 300 400 500 OA 3500 AMPLIFIER SERIES Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com. Sample: OAC-17F3500CA OACCode 17 Power Out1 17 dBm Code F F 03500C Gain Flatness Flattened Code 3 5 9 A C Connector Type2 FC/APC SC/APC FC/UPC SC/UPC (default) MU 1. Other output power options available upon request. 2. More connector options available upon request. User Safety The invisible laser light emitted from this module is harmful to the human eye. Proper laser safety eyewear must be worn during operation. ESD Protection The laser diodes and photodiodes contained in this module are very reliable under normal operating conditions. However, they are easily destroyed by inadvertent electrostatic discharge (ESD). Take extreme precaution to prevent ESD. Use wrist straps, grounded work surfaces, and antistatic techniques when operating this module. When not in use, the fiber amplifier must be kept in a static-free environment with the shorting plug covering the connector. All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. (c)2006 JDS Uniphase Corporation. All rights reserved. 10143101 Rev. 003 10/06 OA3500.DS.CMS.AE NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com |
Price & Availability of OAC-17F03500C3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |